Deliver Your News to the World

Distributed 24 volt power supplies for use directly in the system


WEBWIRE

Siemens’s Industry Automation Division has developed two new 3-phase, 24 volt power supplies: the Sitop PSU300P and the Simatic ET200pro PS. These primary switched-mode 8 amp power supplies have the high IP65 degree of protection, and have been designed for distributed use directly in electrical installations. Sitop PSU300P is suitable for universal applications, whereas the Simatic ET200pro PS has been specifically designed for the Simatic ET200pro distributed I/O system, and supplies the electronic and load voltages to its system components. This power supply also has a special connector for looping through a 3-phase 380–480 AC voltage. Both new power supplies are suitable for use in ambient temperatures ranging between minus 25 and plus 55 degrees Celsius.

Both the Sitop PSU300P and the Simatic ET200pro PS are simply plugged into the mains supply. They are mounted either on a Simatic ET200pro system rail, or just with nuts and bolts. Their rugged construction enables them to be mounted in any position. The operating status "DC 24 volt OK" is indicated by an LED, and output via a signaling contact. A second signaling contact indicates an overtemperature to enable countermeasures to be taken in good time, for example by a higher-level control. The 24 volt output is no-load and short-circuit-proof, and is electronically adjusted down during overload. The new power supplies have Sitop UPS500P uninterruptible power supply (UPS) modules for bridging power failures. These are based on maintenance-free capacitor technology, and also have the IP65 degree of protection. Coupled with the new power supplies they give users the complete solution for an uninterruptible, distributed 24 volt power supply.

Further information can be found on the Internet at: www.siemens.com/sitop
A photo accompanies this press release. You can find this photo on the Internet at: www.siemens.com/ad-picture/1914

The Siemens Industry Sector (Erlangen, Germany) is the worldwide leading supplier of production, transportation, building and lighting technologies. With integrated automation technologies as well as comprehensive industry-specific solutions, Siemens increases the productivity, efficiency and flexibility of its customers in the fields of industry and infrastructure. The Sector consists of six Divisions: Building Technologies, Drive Technologies, Industry Automation, Industry Solutions, Mobility and Osram. With around 222,000 employees worldwide Siemens Industry posted in fiscal year 2008 a profit of EUR3.86 billion with revenues totalling EUR38 billion. www.siemens.com/industry

The Siemens Industry Automation Division (Nuremberg, Germany) is a worldwide leader in the fields of automation systems, low-voltage switchgear and industrial software. Its portfolio ranges from standard products for the manufacturing and process industries to solutions for whole industrial sectors that encompass the automation of entire automobile production facilities and chemical plants. As a leading software supplier, Industry Automation optimizes the entire value added chain of manufacturers – from product design and development to production, sales and a wide range of maintenance services. With around 42,900 employees worldwide Siemens Industry Automation achieved in fiscal year 2008 total sales of EUR8.7 billion.



WebWireID89032





This news content was configured by WebWire editorial staff. Linking is permitted.

News Release Distribution and Press Release Distribution Services Provided by WebWire.