Deliver Your News to the World

New Power MOSFETs from STMicroelectronics Approach “Perfect” Switching Performance


Geneva, Switzerland – WEBWIRE –

Geneva, August 26, 2015 – STMicroelectronics has extended its popular MDmesh™ M2 series of N-channel power MOSFETs with the introduction of  a new family of devices that offer the industry’s highest power efficiencies in power supplies for servers, laptops, telecom, and consumer applications, especially under light-load conditions.  With these new devices, designers can create switching power conversion solutions that are lighter and more compact, while more easily meeting increasingly stringent energy-efficiency targets.
 
The new 600V MDmesh M2 EP devices combine ST’s proven strip layout with a new improved vertical structure and an optimized diffusion process to approach the ideal switch, with very low ON-resistance and the lowest available turn-off switching losses. They are tailored for very-high-frequency converters (f is higher than 150 kHz), making them perfect for the most demanding PSU (Power Supply Unit) applications.
 
Ideal for both hard- and soft-switching topologies, including resonant topologies such as LLC, the new devices offer extremely low switching losses, especially under light-load conditions.  In addition to the very low gate charge (Qg) exhibited by all  MDmesh M2 devices, the M2 EP devices feature up to a 20% reduction in Eoff  (turn-off energy), thus reducing by the same percentage the turn-off switching losses in hard-switching converters. This Eoff reduction in the low current range boosts the efficiency under light-load conditions, where efficiency-certification rules are becoming increasingly demanding.
 
The enhanced shape of the turn-off waveforms leads to higher efficiency and lower noise in resonant converters, allowing more energy to be stored and re-used, rather than dissipated as heat, cycle by cycle.
 
Key features of the new MDmesh M2 EP series include

  • Extremely low Qg (as low as 16 nC)
  • Optimized capacitance profile for light-load conditions
  • Optimized Vth and Rg values for soft switching
  • Body diode ruggedness


 
Offered in a wide range of packages (PowerFLAT 5x6 HV, DPAK, D2PAK, TO-220, TO-220FP, I2PAKFP, and TO-247) the MDmesh M2 EP family targets power-supply applications that require the highest efficiency levels.  All devices are in full production, with pricing starting at $1.5 for the STD15N60M2-EP in a DPAK package for orders of 1000 pieces.
 
For further information please visit: www.st.com/mdmeshm2
 

( Press Release Image: https://photos.webwire.com/prmedia/39750/199730/199730-1.jpg )


WebWireID199730




 
MOSFET
PSU


This news content may be integrated into any legitimate news gathering and publishing effort. Linking is permitted.

News Release Distribution and Press Release Distribution Services Provided by WebWire.