Boeing Engineers Assist NASA in Shuttle Tile Work
ST. LOUIS, Jan. 25, 2006 -- Boeing [NYSE: BA] engineers, working closely with United Space Alliance [USA] and NASA, have found a way to prevent gap fillers, thin spacers between the Space Shuttle’s heat resistant tiles, from protruding from the belly of the Orbiter.
On the last Shuttle mission, two gap fillers were protruding about an inch between the tiles and had to be removed during a spacewalk when analysis showed it could cause increased heating on the Thermal Protection System (TPS) during reentry into the Earth’s atmosphere.
Determining what caused the gap fillers to come out took a little detective work by an integrated team of Boeing, NASA and USA engineers. “The first thing we looked at was the installation process,” said Dan Bell, Boeing TPS subsystem manager. There were multiple possible contributing causes why some of the gap fillers were found with various protrusions after the last flight. The cause was narrowed down to the installation process and a new method was developed.
Work is underway on the vehicles to remove those gap fillers. NASA expects to have them removed and replaced on both Atlantis and Discovery in the priority one region (subjected to higher heating) before the next shuttle flight.
“We ended up saving about 15 percent of those gap fillers that were installed with the old process, while all others in our first priority region were replaced,” said Bell. About 3,000 gap fillers will be replaced in the priority one area. Bell says all gap fillers will be eventually checked and replaced if needed.
“These changes have made all the difference. It has been a real success,” Bell said.
A unit of The Boeing Company, Boeing Integrated Defense Systems is one of the world’s largest space and defense businesses. Headquartered in St. Louis, Boeing Integrated Defense Systems is a $30.5 billion business. It provides network-centric system solutions to its global military, government, and commercial customers. It is a leading provider of intelligence, surveillance and reconnaissance systems; the world’s largest military aircraft manufacturer; the world’s largest satellite manufacturer and a leading provider of space-based communications; the primary systems integrator for U.S. missile defense and Department of Homeland Security; NASA’s largest contractor; and a global leader in sustainment solutions and launch services.
- Contact Information
- Ed Memi
- NASA Systems
- Boeing Company
- Contact via E-mail
This news content was configured by WebWire editorial staff. Linking is permitted.
News Release Distribution and Press Release Distribution Services Provided by WebWire.