Deliver Your News to the World

Epson Expands Lineup of USB 2.0 High-speed Controllers


WEBWIRE

Seiko Epson Corporation (“Epson”) has developed the S1R72V27, the newest USB controller LSI product that is compatible with high-speed USB 2.0. Sample shipments have already begun. The S1R72V series of products have made it possible for users to connect to computers and download large files at super high speeds, and also tap into USB memory to transmit music data at high speeds. Furthermore, significantly extended battery life and reduced noise achieved through Epson’s strengths in the area of low power consumption technology have greatly contributed to the development of mobile devices. The newly developed S1R72V27 is a faster version of the S1R72V17, which accounts for the largest volume of S1R72V series products shipped. While maintaining compatibility with the S1R72V17, the S1R72V27 also meets the many demands of the market.

Features of the new product

1. Compatible with high speeds
* CPU interface speed increased by approximately 30%
2. Supports portable media players
* Enhanced USB Host functions (supports isochronous transfer)
3. Supports in-vehicle applications
* Guaranteed operating temperature range: -40°C to +105°C (S2R72V27)
4. Low power consumption
* Power consumption comparable with the S1R72V17
5. Package and pin arrangement
* Compatible with the S1R72V17 (substitution with S1R72V17 is possible on the same substrate)

Specifications of the new product

1. USB 2.0 host functions
* Equipped with one shared port for both host functions and device functions
* Supports HS (480 Mbps), FS (12 Mbps), LS (1.5 Mbps) transfer rates
* Supports control, bulk, interrupt, and isochronous transfer
* Built-in pull-down resistance for downstream port (external circuit not required)
* USB power switch interface
2. USB 2.0 device functions
* Equipped with one shared port for both host functions and device functions
* Supports HS (480 Mbps) and FS (12 Mbps) transfer rates
* Supports control, bulk, interrupt, and isochronous transfer
* Supports one endpoint for control transfer in addition to five general endpoints for bulk, interrupt, and isochronous transfer
3. CPU interface
* Compatible with 16-bit width general CPU interface
* Includes DMA 1 ch
* Voltage change of interface is possible: 1.8 V to 3.3 V (typical)
4. Low power consumption mode
* Supports a “CPU cut mode” in addition to the normal “sleep mode”
* Equivalent to the S1R72V17
5. Miscellaneous
* Clock input:
12 MHz or 24 MHz crystal oscillator (oscillator circuit and 1 MΩ internal feedback resistor – Epson Toyocom FA-128 or FA-238V recommended)
* External clock:
12 MHz, 24 MHz, or 48 MHz (crystal oscillator, system clock, etc.)
* Power supply voltage:
USB-3.3 V, Internal-1.8 V, CPU Bus-1.8 V to 3.3 V (typical)
* Package:
QFP package (12 mm square, 80 pin, 0.5 mm pitch)
BGA package 1 (8 mm square, 81 pin, 0.8 mm pitch)
BGA package 2 (5 mm square, 60 pin, 0.5 mm pitch)
* Operating temperature range:
- 40°C to +85°C (S1R72V27)
- 40°C to +105°C (S2R72V27)



WebWireID66002





This news content was configured by WebWire editorial staff. Linking is permitted.

News Release Distribution and Press Release Distribution Services Provided by WebWire.