Deliver Your News to the World

WTO’s Innovative New “QuickFlex®” System Saves Money Up Front—and Over Time

The perfect combination: ER collet chuck and Quick Change system in one toolholder.


WEBWIRE

Charlotte, NC (August 2013)— In the past, acquiring live tooling after a major machine purchase has usually required a substantial additional investment—one that was often out of reach for companies that already stretched the budget to acquire the best possible machine tool. In today’s competitive marketplace (especially in the midst of a still sluggish economy) this additional investment can be far worse than uncomfortable: in fact it causes many companies to make decisions to procure tooling far less than complimentary to their new machine investment. That’s why, for leaders focused on conserving costs and improving productivity, WTO’s innovative new system can be a game-changer.

QuickFlex®, an innovative flexible tooling system for driven toolholders, greatly minimizes the initial out-of-pocket tooling costs. Plus, it dramatically reduces tool change time and provides greater long term flexibility.

“Providing an ER collet chuck and quick change system in one toolholder allows you to buy many fewer tools than you would have to otherwise,” says Anthony DeHart, Director of Sales & Business Development at WTO USA. “Best of all, this flexible system doesn’t compromise rigidity, performance, or accuracy, which is great news for high-precision contract manufacturers.”

QuickFlex® was officially introduced in 2012 and is now available for the North American market. It is a complete toolholder program available for the most turning centers using BMT style toolholders.

Specifically, DeHart says, the QuickFlex® base unit allows customers to clamp tools directly into the ER collet of the tool holder—no additional adaptor is necessary. If customers acquire additional types of tooling in the future, they can be easily be accommodated by using the QuickFlex® Adaptors, which are mounted directly into the base unit.

“The base unit comes in a straight (radial) or right angle (axial) configuration, which—combined with the wide range of adaptors available—covers virtually any machining process requirement, all in a single system,” DeHart explains. “This approach enables the company to incrementally invest in a full range of options with minimal initial capital requirements. It also accommodates the multiple setups and frequent changeovers that are required for the short manufacturing runs in today’s production environment.”

Here, DeHart shares seven specific benefits of WTO’s QuickFlex® system:

QuickFlex® is comprehensive. The comprehensive QuickFlex® system covers a full range of different tool clamping adapter types and sizes.

The system is extremely cost-effective. With a minimal initial investment, customers can get unprecedented use of traditional toolholders. Start by simply clamping the cutting tools directly into the toolholder using a standard ER collet. You don’t have to buy adaptors until they are needed.

Set-up time is reduced. For all manufacturers, time is money. Set-up delays can seriously cut into productivity and reduce profit. QuickFlex® adaptors with cutting tools mounted can be pre-set, significantly reducing the tool change time.

QuickFlex® delivers precision and performance. WTO has always set the benchmarks for driven tool technology with its inventions. With QuickFlex®, the company is once again breaking ground as it combines precision with high rigidity and safety.

It incorporates user-friendly handling. Changing tools is quick and easy with WTO’s new one-hand wrench (patent-registered). Use the one-hand wrench holding the QuickFlex® spindle and tighten the large collet nut with a spanner wrench. The QuickFlex® adapters, which use a built in threaded nut, are tightened the same way.

It’s also surprisingly flexible. While the QuickFlex® toolholder can be used without any of the adaptors, it’s easy to migrate to a quick change functional system. Once you introduce QuickFlex® adaptors, you’ll reduce tool change time even more dramatically. A cost effective complete quick starter kit includes three different adapters and a one-hand wrench set.

QuickFlex® improves tool change handling. In the past, changing tools has been difficult, time-consuming, and in some cases risky. Not so with QuickFlex®. This system boasts quick, easy, and safe tool change handling with the new and one-hand wrench.

“With QuickFlex®, our goal was to develop a compact, simple, and safe quick change system for driven toolholders,” Karlheinz Jansen, Technical Director and member of management WTO GmbH concludes. “High cutting performance and long life have always been the benchmark of our Performance Series. Now, we’ve made those high-quality products even better!”

About WTO:

WTO, a privately held family enterprise, led by the second generation with headquarters in Ohlsbach, Germany. Specialized in the design and manufacture of precision tool holders since 1977, WTO has always set the benchmarks of driven tool technology with innovation and new product developments. The company maintains a strategic advantage by limiting its focus to driven tool holders.

Offices in Charlotte, NC are dedicated to customer service and support for the North American markets. An in-house service center provides both preventative maintenance and complete rebuilds to exacting factory standards.

All WTO products are made in Germany and include:

- Precision static and driven toolholders / Performance Series® / QuickFlex® Series

- Gear hobbing units for CNC Lathes

- Thread whirling units for Swiss Type turning centers

See QuickFlex® first hand at the following trade shows:

CMTS  Booth # 4101, Sept. 30-Oct. 3 at The International Centre, Mississauga, Ontario

Westec Booth # 3518 Oct. 15-17 at the Los Angeles Convention Center, LA, CA

South-Tec Booth # 1426, Oct. 29-31 at the TD Convention Center, Greenville, SC

For more information, please contact:

Anthony DeHart, Director of Sales and Business Development

Telephone: +828-217-3739,

E-mail: anthony.dehart@wto-usa.com

WTO Inc.

14301-4 South Lakes Drive

Charlotte, NC 28273 USA

Telephone: +1 704 714 7765

Fax: +1 704 714 7767

www.wto-usa.com

http://wto-quickflex.com



WebWireID179182




 
 Live Tooling for Lathes
 Quick Change Tooling
 Flexible Live Tooling
 Driven Toolholders


This news content may be integrated into any legitimate news gathering and publishing effort. Linking is permitted.

News Release Distribution and Press Release Distribution Services Provided by WebWire.