GE Oil & Gas Wins US$25 Million OMV Contract to Supply Advanced Compressor Technology for Penta West Gas Pipeline Extension
Electricity-Driven ICL Units Offer Lower Emissions, Operating Benefits
FLORENCE, ITALY, LE CREUSOT, FRANCE .—GE Oil & Gas has been selected by OMV Gas GmbH of Vienna, Austria to supply integrated compressor line (ICL) technology for OMV’s Neustift compression station, which is part of the extension of the Penta West Gas Pipeline, a key supplier of natural gas for Austria and bordering states. With this construction, the capacity of the Penta West Gas Pipeline will be doubled.
Under a contract of approximately US$25 million, GE Oil & Gas will supply three ICL units, which are designed to offer operating and environmental benefits. Each ICL unit consists of a centrifugal compressor, high-speed motor, transformer and variable-speed drive. The scope of the contract also covers spare parts, training and turnkey installation.
“We decided in favor of ICL technology because GE Oil & Gas is breaking new ground in emission technology and noise reduction,” said Hermann Lang, project manager of OMV Gas GmbH. “After careful consideration of the sensitive location Neustift, ICL seemed to be the ideal technology to be used for the first time.”
Introduced in 2007, ICL is an integrated system with a single casing for the compressor and the motor. Driven by electricity rather than gas, ICL technology saves energy and avoids associated CO2 emissions. Using a typical eight-megawatt ICL rather than a comparably sized gas turbine-driven compressor can reduce CO2 emissions by 60% or more.
ICL units do not require a gearbox, lube oil system, shaft seals or external cooling system, enabling higher reliability and less maintenance at lower cost. Other benefits include a smaller footprint and a smaller compression building, ease of installation, higher availability than a conventional electric motor-driven solution, a continuous speed range that enables a wide operating range and a low noise level, in addition to low emissions.
ICL technology has received GE ecomagination certification. Ecomagination is GE’s corporate-wide commitment to address the need for cleaner, more efficient sources of energy, reduced emissions and abundant sources of clean water.
“The project with OMV Gas GmbH, one of central Europe’s leading gas companies, is another example of the strong interest our customers are showing in technology that is designed to help the environment,” said Joe Mastrangelo, vice president—turbomachinery at GE Oil & Gas. “We have designed the ICL product line to address today’s growing requirements for reliability, pollution and noise control for oil and gas applications with clean dry gas services up to 15 megawatts of power. The use of ICL technology will help OMV meet Austria’s environmental requirements, which we expect to become increasingly stringent in the years ahead.”
The ICL units for the OMV – Neustift compression station will be manufactured and tested at GE Oil & Gas facilities in Le Creusot, France and will be delivered to the project site in August of 2010, with commercial service expected to start in early 2011.
This news content was configured by WebWire editorial staff. Linking is permitted.
News Release Distribution and Press Release Distribution Services Provided by WebWire.