Raytek CS210 Process Imaging System for Continuous Kiln Monitoring Now with 3D View and Refractory Management

New features extend capabilities of cement kiln shell temperature monitoring and analysis system


Santa Cruz, California, USA – WEBWIRE – Monday, February 10, 2014

Enhanced kiln shell scanning system helps cement manufacturers avoid costly damage and unscheduled downtime by monitoring rotary kilns to detect hot spots due to refractory loss, damage and wear.

SANTA CRUZ, Calif. — Raytek®, a leading worldwide provider of infrared (IR) thermometry, has extended the capabilities of its CS210 process imaging system for cement kilns with optional, fully integrated 3D View and Refractory Management Database modules. This enhanced kiln shell scanning system enables cement manufacturers to avoid costly damage and unscheduled downtime by continuously monitoring rotary kilns to detect hot spots due to refractory loss, damage and wear.
 
Using the CS210 infrared (IR) linescanning solution, which now supports up to four scanners, cement plant operators can determine the effectiveness of kiln refractory material. Fallen bricks will be quickly detected and appropriate action may be taken to prevent further damage. Scheduled maintenance can also be planned to replace the refractory with a minimum of downtime. Thus, the refractory life can be extended to provide economic benefits, and avert emergencies.
 
The 3D View Module will help users to easily understand all the data from the kiln and its environment, including the live view of the rotating kiln, life rings and zone (with optional hardware) - even for the non-refractory related “real-time view,” which is part of the standard CS system.
 
The Refractory Management Module will help users determine when to change the refractory of a cement kiln. Its database is based on an enhanced data management system that can monitor the installed brick, including gathering, storing and analyzing all necessary data to indicate refractory wear during use. The system software features an easy user interface for entering standard data with predefined drop down lists, as well as easy-to-use history tracking that includes all related refractory and kiln data, maintenance data, date, time and record of changes made by user name.
 
With the CS210, temperature is monitored along the entire length of the kiln shell with “one brick” resolution. The system provides fail-safe hot spot alarm outputs. Operators can also detect abnormal conditions, such as faulty flame position and shape. Temperature data for areas “shadowed” from the main sensor are provided by individual point sensors and seamlessly integrated into a complete, real-time thermal image.
 
At the core of the CS210 system is a specially built MP150 HR linescanner with 1024 data points per scan line, and an integral heater, configured for the user’s kiln applications. Featuring state-of-the-art optics, advanced microprocessor electronics and a high-reliability motor, the MP150 combines signal processing, data storage and data communications into one integral unit. To insure reliable operation in even the harshest kiln environments, the linescanner is designed with a rugged cast aluminum housing, which, in turn, is mounted in a stainless steel protective housing with provisions for air-purge and water-cooling.
 
The CS210 process imaging system employs onboard Ethernet TCP/IP communications and interfaces with other programs via OPC. The system’s user-friendly DataTemp® CS Software is fully compatible with Windows® 7 and provides easy configuration/startup, as well as multiple security settings. The graphical user interface is designed specifically for kiln applications, allowing for easy scanner set-up and use with little operator training.
 
Installation of the CS210 process imaging system has been simplified with the addition of a single fiber-optic communication channel to carry all system data from the scanning system located at the kiln to the host computer imaging system in the control room.
 
With DataTemp software accessories, the CS210 system expands to become a comprehensive kiln-monitoring tool. For example, optional burning zone sensor and Live Ring Migration (LRM) tire slip monitoring can be integrated into the system so that complete information is displayed on a single screen in the control room, and all data, events and alarms are stored and accessible in a common database. Fan control and shadow monitoring accessories are also available.
 
For more information, please visit the Raytek website at www.raytek.com/cs210
 
About Raytek
 
Headquartered in Santa Cruz, California, Raytek, a Fluke company, is the worldwide leader in noncontact temperature measurement. Raytek designs, manufactures and markets a complete line of infrared (IR) temperature measurement instruments for industrial, maintenance and quality control applications. Raytek distributes its products worldwide with subsidiaries located in Europe and China. For more information, visit www.raytek.com.


( Press Release Image: http://photos.webwire.com/prmedia/18215/185315/185315-1.jpg )


WebWireID185315




 
 Cement production
 IR thermography
 Infrared linescanners
 Temperature measurement
 Cement manufacturing
Contact Information
Arlene Lucas Starrh
Sr. Global Marketing Communications Manager
Raytek
Contact via E-mail


This news content may be integrated into any legitimate news gathering and publishing effort. Linking is permitted.

News Release Distribution and Press Release Distribution Services Provided by WebWire.