New Unique Brushcutter Blade With Attitude and Long Life

Brushcutter Co. is an Internet only, supply company, with products that help people in the farming; agricultural contracting and lawn care business. The company has just released a very interesting new type of Brushcutter Blade and a similar grass cutter blade, which offers a number of very worthwhile and rewarding benefits to the user

Welcome to the world of brush cutting and grass cutting. Brushcutter Co. is in association with a designer of unique and practical equipment for the farmer, the agricultural contractor and the lawn care market. The Tri-Blade is its first major product release, but its design and development knowledge comes from 20 years of working in the lawn care business.

The company is based in New Zealand and the plan is to release locally through local agents, but with a secondary campaign on the Internet. It was decided that with the Internet’s marketing exposure, the company would gain an international profile, which would benefit the company’s growth plans. Also, any orders received from overseas buyers would be shipped from the base in New Zealand as with today’s rapid postal systems it is able to supply these brushcutting blades to a worldwide market.

Peter Devaney of Brushcutter Co, said: "Brushcutter Blade by Airecut is designed to halve the workload of the user, and with its self sharpening plus very long work life, the company is sure that this brush cutting blade will prove invaluable to the groundcare industry.”

Just one blade that cuts all materials like grass, brush, gorse, reeds, bamboo and timber (up to 25mm thick).

Efficient cutting, self-sharpening, economical, long blade life, (dependent upon use, over 900 hours are possibly). A constant clean sharp blade means much less physical effort, which equates to chopping 50% off the usual cutting time. One blade does all that, and stays sharp for many months.

The unique design of the Airecut Tri-Blade is based upon simple everyday actions that when combined together, form a very reactive mechanism for the cutting of all manner of brush. Self-sharpening blade. A simple explanation about this is that the blade has 2 reverse bevels to each blade arm. These are parallel to each other, and to the ground, and so the fibrous nature of the cut material, which previously blunted the blade, now sharpens it. The next stage of design was to enable effective clearing of the cut material, and thus avoid clogging the following cutting heads. A simple idea again solved this problem. A unique aerofoil type twist was added to the end section of the cutting blade. This works just like an airplane wing and lifts the cut material clear of the following cutting blades. This saves a great deal of time and energy in the whole application .

Peter Devaney states that they have put all these simple, but very innovative designs to the test, and along with the many New Zealand customers who are now using this Brushcutter Blade, they can all say that this is absolutely the best blade that they have ever used.

One blade does it all, with no changes for different materials, or for sharpening. When a user goes out to start their cutting project, they don’t need to carry a selection of blades to suit the varied material that they may have to contend with throughout the day.

Just One Tri-Blade

There is another amazing result created through the unique design of this Brushcutter Blade that needs to be noted. This is the energy required to drive the blade. All the work we talked about above, can be accomplished with just a 30cc machine, which will save fuel and effort. its hard to know where to stop with the remarkable benefits of the Airecut Brushcutter Tri-Blade"

The people at Brushcutter Co have tried and tested this Brushcutter Blade in many practical applications and when the video is run. It will show the ease of cutting grass where the flow of cut material leaves a clean, cut area behind the cutting blade. There is also video of the cutting of very heavy gorse and this was cut with minimal effort, as can be seen. And with close attention to the video, it is clear that the stump that was cut, substantially exceeded our 25mm approval size.

The self-sharpening function works perfectly in the field, and there are a number of blades that have reached the 900 hour limit, and are still working well. the grass cutting blade application is so simple and fast that when cutting, a user would have to almost run to keep up with the cutting action. all this work potential at ones fingertips and the most important statement is that the Airecut Brushcutter Blade fits to most of the current brushcutter machines in use today. To find out more about this great product, please visit http://www.brush-cutter.com.

Contact Information

Peter Devaney

Partner

Build 8 Consultants Ltd

Contact via E-mail